«Standard Packing Procedure at ExPlus»
After the PCB passed FQC inspection and OQC inspector confirmed O.K., the PCB will be transferred to the warehouse and waiting for packing. When the packing staff receive PCB, he or she will first check the part number and OP, and then follow client requirements if there’s any for packing.
«Reduce potential risks during International transportation»
Different from domestic delivery, the PCB manufacturer shall consider all kinds of risk such as bumpy, falling and so on during international shipping. To reduce the risk of PCB damage due to transportation, ExPlus’ standard packing procedure will be following. First, the carton shall be multiple layers waterproof carton. Second, before place PCB into the carton, the packing staff will put buffer packaging materials(at ExPlus we use wave board as below image shows) on the bottom of carton and then surround the PCB with more wave boards for protection. Once the packing staff ensure the board won’t slide due to any movement, he or she could seal the box and measure the weight. For safety concern, the Net weight of each carton won’t exceed 20 k.g.. On outside of carton, the details including part number, PO, D/C, quantity and weight shall be listed. Once the box is sealed, it’s all ready to go.
