Common Lamination Quality Issues and Improvement Methods


Common defects that may occur during the PCB lamination process include voids, inner-layer slip/misalignment, resin starvation, and warpage.

Typical improvement methods include:
· Increase/improve the vacuum level: Reduce entrapped air and the formation of voids.
· Precisely control the heating rate: Prevent premature resin curing or excessive resin flow.
· Select prepreg with an appropriate resin content: Insufficient resin content may result in resin starvation, while excessive resin content may cause resin squeeze-out or excessive resin flow.
· Strictly control inner-layer cleaning and baking: Remove contaminants and residual moisture that could adversely affect lamination quality.

Good lamination quality not only ensures uniform dielectric thickness and overall board thickness, but also helps maintain stable electrical performance and improve PCB reliability.